Analysis Of Stud Bolt Inspection And Application Technology

Oct 21, 2025

Leave a message

In modern machinery manufacturing, steel structures, and construction engineering, double-headed screws are widely used fasteners. Also known as double-threaded screws, double-threaded rods, or two-end stud bolts, they feature threads at both ends and a central rod. These threads can be either equal diameter or have varying thread sizes depending on design requirements.

 

This fastener is widely used in the installation of mining machinery, bridges, automobiles, boilers, crane towers, long-span steel structures, and large equipment, offering reliable connections, easy assembly and disassembly, and strong versatility.

 

 two-end stud bolts

 

 

Inspection Items for Stud Bolts

 

Stud bolts undergo multiple inspections before leaving the factory to ensure their structural integrity and stable performance. Key inspections include visual inspection, dimensional measurement, material analysis, and mechanical property testing.

 

Appearance Inspection
Inspect the twin-end screw surface visually or with a magnifying glass for cracks, nicks, burrs, and rust.

 

Dimensional Measurement
Use calipers, micrometers, thread gauges, and other measuring tools to check that the bolt's pitch, diameter, and length meet standards. Dimensional accuracy is particularly critical for high-precision connections involving double-headed machine screws and two-sided bolts.

 

Hardness and Strength Testing
Use a hardness tester and a tensile testing machine to measure the bolt's tensile strength, yield strength, and elongation to ensure it meets connection requirements under high loads.

 

Material and Composition Analysis
Use a spectrometer to determine chemical composition, and use a metallographic microscope to examine the metallographic structure to determine material uniformity and heat treatment effectiveness.

 

Nondestructive Testing
Perform ultrasonic or magnetic particle inspection on products such as dowel screws and hanger bolts to ensure they are free of internal defects such as cracks and pores.

 

Typical Application Scenarios

 

Large Equipment Accessory Installation
In large machinery or pressure vessels, twin-end bolts or M8 double-ended dowel screws are often used to secure accessories such as sight glasses, seals, or reducer housings. One end screws into the main body, while the other end is secured with a nut. This allows for easy assembly and disassembly while effectively protecting the main thread structure.

 

Thick Plate or Deep Hole Connections
When the connecting parts are thick or cannot be penetrated by ordinary bolts, double-threaded rods are often used to achieve a secure connection.

 

Building Structure Connections
At the junction of steel structures and concrete roof trusses, hanger bolts enable secure installation of suspended beams or monorail beams.

 

Application of  two-end stud bolts

 

 

Anti-Loosening and Surface Treatment

 

Due to the potential for vibration, thermal expansion, and load fluctuations in the operating environment, threaded connections are prone to loosening. To prevent failure, stud bolts typically feature anti-loosening designs and surface treatments.

 

Common surface treatments include:

 

Electroplating with zinc, nickel, or chromium to improve corrosion resistance;

Blackening, oxidation, and phosphating to enhance wear resistance;

Non-electrolytic zinc flake coating to improve rust resistance and interchangeability.

 

For fasteners such as double-headed screws and two-end stud bolts, surface treatment must not only ensure corrosion protection but also ensure thread engagement accuracy and interchangeability.
 

Manufacturing Process

 

Although the manufacturing process of stud bolts is simple, it requires high dimensional and machining accuracy. The basic process flow is as follows:

 

Raw Material Straightening
Raw material is straightened using a stripping machine to eliminate bending stress.

 

Cutting and Cutting
Straight material is cut to the required length using a cutting machine to form the initial screw rod or twin-end bolt blank.

 

Thread Rolling
Threads are formed on a thread rolling machine to form the completed double-thread screw or double-headed machine screw.

 

Surface Treatment and Inspection
After surface treatment, finished products undergo re-inspection for hardness, dimensions, and corrosion resistance to ensure that the bolts meet standardization and mass production requirements.

 

Production Process of Screw Terminal and  two-end stud bolts

 

 

Conclusion

 

Stud bolts and their derivatives, such as double-thread screws, twin-end bolts, M8 double-ended dowel screws, and hanger bolts, play an indispensable role in modern manufacturing.


Through scientific testing methods, precise manufacturing processes, and appropriate surface treatment, these two-sided and two-end stud bolts not only meet high-strength assembly requirements but also ensure structural stability and long service life.

 

In the future, with the continuous development of automated processing and intelligent inspection technologies, the production accuracy, material performance, and operational reliability of stud bolts will be further improved, providing safer and more efficient connection solutions for machinery manufacturing, construction engineering, and new energy equipment.

 

contact us


Mr. Terry from Xiamen Apollo

Send Inquiry