New Fastener Standards Released: Promoting Reliability Improvement And Accelerating Alignment With International Standards

Mar 24, 2026

Leave a message

With the continuous development of the machinery manufacturing, automotive, and electronic equipment industries, fasteners, as the most basic and critical connecting components in mechanical structures, directly affect the safety, stability, and long-term reliability of the entire equipment through their standardization level. In recent years, my country's fastener industry has been continuously aligning itself with international standards in terms of product specifications, performance testing, and quality management. The State Administration for Market Regulation and the Standardization Administration of China recently approved and released a batch of new national standards, many of which involve important specifications for fastener manufacturing, testing, and quality management, laying a technical foundation for the further standardized development of the industry. The implementation of these standards will provide more unified and stringent technical guidelines for various structural fastener products, including Hex Bolts.

 

304 Stainless Steel Hex Bolt Screw Nut

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Among the standards released this time, "GB/T90.1-2023 Fasteners - Acceptance Inspection" is considered an important supplement to the quality management system. This standard introduces a small sample size acceptance inspection method based on Ac=0, which improves the economy and operability of sampling inspection while ensuring the scientific nature of product quality assessment. Due to the wide variety of fastener product specifications and the destructive nature of some performance tests, 100% inspection is difficult to implement in actual production and delivery.

 

Therefore, sampling inspection has become a common quality control method in the industry. The new standard further standardizes the acceptance inspection process, marking, and packaging requirements, providing clearer quality judgment criteria for various fastener products, including Machine Screws with Phillips Heads, during the delivery stage.

 

Regarding surface treatment standards, the newly released GB/T5267.1-2023 Fasteners - Electroplating Coatings has systematically upgraded the original standard. The new standard expands its scope of application, covering various products such as self-tapping screws, self-extruding screws, washers, rivets, and clamps, and adds requirements for corrosion resistance and hydrogen embrittlement risk control. This standard references international ISO standards in its technical framework, making the performance indicators and testing methods of Chinese electroplated fasteners more internationally compatible. For Pan Head Screws, Stainless Steel, and other structural fasteners widely used in equipment structures, this standard will significantly improve their surface protection performance and service life.

 

Regarding mechanical properties, GB/T 3098.6-2023 "Mechanical Properties of Fasteners - Stainless Steel Bolts, Screws and Studs" has made significant additions to the material grades and performance indicators. The new standard adds duplex stainless steel material options with performance grades 70, 80, and 100, further increases the minimum tensile load requirements, and optimizes the testing methods. These improvements not only enhance the load-bearing capacity of the products but also provide more material options for high-strength fastener design. For example, Flat-head Hexagon Socket Stainless Steel Screws, widely used in structural connections, can obtain more reliable performance verification under the new standard system.

 

The accompanying GB/T 3098.15-2023 "Mechanical Properties of Fasteners - Nuts" has also been updated accordingly. The new standard supplements the performance grades of duplex stainless steel, improves the classification of nut types and the calculation method for guaranteed load, and further standardizes the marking rules. The clarification of these technical requirements makes the matching relationship between bolts and nuts clearer, providing greater safety assurance for combined fastener systems, including Flanged Hexagon Head Bolt Screws.

 

In addition to the key standards mentioned above, several specifications released this time also cover specific structural fastener products. For example, GB/T70.3-2023 Reduced Load Capacity Countersunk Hex Socket Head Screws applies to coarse thread specifications from M2 to M20, covering performance grades such as 8.8, 10.9, and 12.9. These products are widely used in equipment structural components, precision machinery, and electronic equipment assembly, including common fastener types such as Countersunk Flat Head Screws. Meanwhile, GB/T15856.5-2023 Hexagon Flange Self-Drilling Self-Tapping Screws have also been updated. These products have significant advantages in rapid installation and lightweight structures, and are widely used in construction, equipment assembly, and industrial manufacturing, along with products such as stainless steel sheet metal screws.

 

Overall, the release of the new standard not only reflects the continuous progress of my country's fastener industry in quality management and technical specifications, but also reflects the manufacturing industry's trend towards higher reliability and international standards. By improving material properties, testing methods, and quality acceptance systems, the new standard will promote higher levels of standardization and quality control for various fastener products, including stainless steel pan head screws and stainless steel set screws, providing more stable and reliable connection solutions for fields such as machinery, transportation, and new energy equipment.

 

For fastener design and manufacturing companies, the implementation of the new standard not only means higher technical requirements but also provides new development opportunities for industry upgrading. Companies need to comprehensively align with the new standard in product design, material selection, production processes, and quality testing, enhancing product competitiveness through technological optimization and process upgrades. Simultaneously, in the development of new structural fasteners such as stainless tapcon and other high-performance steel screws, the changes in technical specifications brought about by the standard system should be fully considered to ensure that products meet future market demands.

 

Production Process of 304 Stainless Steel Hex Bolt Screw Nut

 

 

About Us

 

As a company specializing in the manufacture of precision connectors, we have long been committed to the research, development, and production of high-quality industrial fasteners. Our products cover a variety of structural solutions, including Stainless Steel Screws, M6 Hexagon Socket Head Screws (304 Stainless Steel Knurling), Hexagon Head Machine Screws (Metric Thread Flat Spring Lock Washer Bolts, 304 Stainless Steel), and M10 304 Stainless Steel Hex Bolt Screw Nut Flat Washer Combinations. We also provide components such as the M10 Clamp Wire Terminal and M8 Socket Head Cap Screws Terminal with Spacer for electrical connections, providing stable and reliable connection support for machinery, electrical systems, and new energy fields. In the future, the company will continue to benchmark against international standards and provide safer and higher-performance fastener solutions to global industrial customers through continuous upgrades in material technology and manufacturing processes.

 

contact us


Mr Terry from Xiamen Apollo

Send Inquiry