The application and technical value of advanced ceramics in the context of electrification upgrading of new energy vehicles

Aug 18, 2026

Leave a message

The transformation of new energy vehicles from traditional fuel power to electric drive, intelligent control, and high-voltage electrical systems has not only changed the power structure of the vehicle but also promoted the material upgrade of key components such as high-voltage relays, power semiconductors, motor bearings, and electronic control systems. With the continuous development of 800V and higher voltage platforms, high-power density electric drive systems and fast charging and discharging technologies, components are also facing higher voltage, current, temperature, frequency, and reliability requirements.

 

In this process, advanced ceramics have gradually expanded from traditional structural materials to high-voltage electrical, power electronics, and drive systems for new energy vehicles by virtue of their high dielectric strength, high temperature resistance, corrosion resistance, high mechanical strength, and good dimensional stability. Its application focuses on high-voltage DC switching devices, power semiconductor packaging, ceramic high-voltage contactors, and motor insulated bearings.

 

Metallization Ceramic

 

 

Ceramic insulation structure in high-voltage DC switching devices

 

The high-voltage electrical system of new energy vehicles usually requires relays or contactors to achieve connection, disconnection, and safe isolation between the battery pack and high-voltage circuits such as inverters, motors, and charging systems. Compared with low-voltage automotive electrical systems, switching in high-voltage DC environments is more complex. Especially when disconnecting circuits under high current conditions, arcs are likely to occur between contacts, which places higher requirements on the insulation structure and arc-extinguishing capabilities.

 

Ceramic materials have excellent electrical insulation properties and high temperature resistance, and can be used in insulating shells, insulating sleeves, and sealing structures inside high-voltage DC relays and contactors. Through the reliable sealing of ceramic and metal materials, a relatively closed internal working space can be formed to maintain stable insulation between high-voltage conductive components and the external structure, while providing necessary sealing conditions for the arc extinguishing medium.

 

In high-voltage switching devices, alumina ceramic is one of the more common insulating materials. Alumina systems of different purity and performance levels can be further selected based on different voltage levels, mechanical strength, thermal properties, and size requirements. For parts that need to meet the requirements of insulation, mechanical support, and metal sealing at the same time, Alumina Metallized Ceramics can achieve reliable connections between ceramics and metals through ceramic surface metallization and brazing processes.

 

The value of ceramic materials in such products is not limited to insulation. Transient heat and mechanical stress will be generated during the operation of high-voltage contactors, so the ceramic shell also needs to have good thermal stability, dimensional stability, and thermal shock resistance. Material selection, structural design, and metallization process need to be comprehensively designed based on actual operating voltage, current, temperature, and life requirements.

 

Details Presentation of Metallization Ceramic

 

 

Ceramic copper-clad substrates in power semiconductor packaging

 

One of the cores of the electric drive system of new energy vehicles is the power electronic controller, whose main function is to complete the efficient conversion between the DC power of the power battery and the AC power required by the motor. As the power density of electric drive systems increases, power semiconductor devices need to withstand higher currents and more frequent thermal cycles. Therefore, packaging materials must not only have good insulation properties, but also must take into account heat dissipation, mechanical strength, and thermal expansion matching.

 

Ceramic copper-clad substrates are usually composed of copper layers, ceramic insulation layers, and copper layers. The ceramic layer is responsible for electrical insulation and mechanical support functions, and the copper layer is responsible for current transmission, chip connection, and heat dissipation. Compared with pure organic insulating materials, ceramic substrates can maintain stable electrical and mechanical properties in higher temperature environments, making them suitable for high-power-density power electronic modules.

 

Common ceramic materials currently used in new energy vehicle power modules include aluminum oxide, aluminum nitride, and silicon nitride. Aluminum oxide has the characteristics of relatively moderate cost, good insulation performance, and a mature process; aluminum nitride has high thermal conductivity and has advantages in scenarios with high heat dissipation requirements; silicon nitride has high mechanical strength, thermal stability, and thermal cycle resistance, and is more suitable for power electronic applications that require high long-term reliability.

 

As new energy vehicle power modules develop towards high voltage, high current and miniaturization, the demand for high-precision ceramic metallized components such as Precision Metallized Ceramics has also increased. The metallization layer on the ceramic surface needs to have good adhesion strength and stable electrical properties, and be able to withstand the stress generated during subsequent welding, brazing, and thermal cycling.

 

For power semiconductor packaging, matching the thermal expansion coefficient between the ceramic material and the copper layer is very important. During actual operation, new energy vehicles will experience starting, acceleration, braking, fast charging, and different environmental temperature changes, and the power module will repeatedly experience heating and cooling. If the difference in thermal expansion between materials is too large, long-term thermal cycling may cause interface fatigue, cracks, or delamination, thereby affecting module life.

 

Therefore, the ceramic packaging design of new energy vehicle power modules needs to consider thermal conductivity, insulation strength, mechanical strength, thermal expansion matching, and processing accuracy at the same time, and cannot simply rely on a certain material performance as the basis for selection.

 

The role of ceramic metallization technology in the electrical connection of new energy vehicles

 

Ceramic itself has excellent insulation properties, but in actual electronic devices, ceramics usually need to be connected to metal conductors, electrodes, or packaging structures. Therefore, ceramic surface metallization has become an important process to achieve a reliable combination of ceramics and metals.

 

The basic idea of ​​ceramic metallization is to form a metal layer with a certain thickness and adhesion strength on the ceramic surface, so that it can be further brazed, welded, or undergo other connection processing. The metallized layer not only needs to have good electrical conductivity, but also needs to form a stable interface bond with the ceramic matrix.

 

For high-voltage devices of new energy vehicles, the reliability of the metallization layer directly affects the air tightness, insulation performance, and mechanical stability of the packaging structure. For example, the ceramic insulator inside the high-voltage relay needs to form a reliable connection with the metal shell; the ceramic substrate in the power semiconductor module needs to form a stable bond with the copper layer.

 

Among high-precision electronic components, Alumina ceramic parts precision machining can further meet complex size, tolerance, hole location, and end face accuracy requirements. For high-voltage devices for new energy vehicles, ceramic parts often need to meet the requirements of miniaturization, complex structure, and high reliability at the same time. Therefore, material preparation and precision processing need to be controlled collaboratively.

 

Production Technology and Application of Metallization Ceramic

 

 

Ceramic shell design in high-voltage contactors

 

A high-voltage contactor is an important switching component in the high-voltage electrical system of new energy vehicles. Its main function is to control the switching of high-voltage circuits during vehicle starting, stopping, charging, and fault protection. Since new energy vehicle power batteries usually use DC voltages of hundreds of volts or even higher, high-voltage contactors must maintain reliable operation under high electrical stress.

 

HVDC contactor ceramic enclosures usually perform multiple functions such as internal insulation, structural support, and sealing. Ceramic housings need to maintain stable insulation in high-voltage environments while withstanding internal temperature changes and mechanical stresses.

 

High-voltage contactors usually use ceramic and metal sealing structures. The connection area between ceramic and metal is one of the keys to the reliability of the entire device. If there are defects in the sealing interface, cracks, leaks, and other problems may occur under the action of long-term thermal cycles, mechanical vibration, or internal pressure changes.

 

Therefore, the manufacture of ceramic high-voltage contactors usually requires focusing on controlling the purity of ceramic materials, sintering quality, dimensional accuracy, metallization layer quality and ceramic-metal sealing strength. For high-reliability products, verification of air tightness, electrical insulation, voltage resistance, and thermal cycle is also required.

 

From the perspective of materials engineering, ceramic-to-metal connection is not a simple mechanical combination, but involves multiple factors such as material thermal expansion coefficient, interface wettability, solder selection, sealing temperature, and residual stress control. Only by achieving a stable combination of ceramic and metal interfaces can the sealing and insulation reliability of high-voltage devices be ensured in long-term operation.

 

Ceramic bearings and insulation requirements in motor systems

 

New energy vehicle drive motors usually have high rotational speeds, and there is a complex electromagnetic environment inside the motor. Compared with traditional mechanical systems, in addition to bearing radial and axial loads, new energy vehicle motor bearings also need to face problems such as high-speed rotation, temperature rise, current, and electrical corrosion.

 

Traditional metal bearings may generate shaft currents under certain motor operating conditions. When current passes through the interior of the bearing, arc discharge may be formed in the contact area between the rolling element and the raceway, causing pitting corrosion, erosion, and surface damage, ultimately affecting the bearing life.

 

Ceramic rolling elements have the characteristics of low density, high hardness, good wear resistance, and excellent electrical insulation properties. Therefore, hybrid ceramic bearings have certain application value in high-speed motors and electrified power systems. The combination of ceramic rolling elements and metal ferrules can reduce the quality of the rolling elements while maintaining the structural strength of the bearing, and improve the friction and electrical insulation properties under high-speed operating conditions.

 

The requirements for bearings in new energy vehicle motors have also promoted the development of high-performance ceramic components such as High-Strength Metallized Ceramic Components. Although metallized ceramics and motor bearings belong to different types of applications, they embody the same material development trend, which is to solve the performance limitations of traditional metal materials under specific working conditions through the insulation, high strength, and high temperature resistance properties of ceramic materials.

 

Application expansion of advanced ceramics in high-voltage systems of new energy vehicles

 

As the voltage platform of new energy vehicles continues to improve, the application scope of advanced ceramics is gradually expanding from single insulation components to high-voltage switches, power modules, sensors, connection structures, and thermal management-related components.

 

In high-voltage electrical components, Metallized Alumina Ceramics for Electrical Components can achieve the integration of insulation, conductivity, and mechanical connection functions through the combination of a ceramic insulating matrix and metallized conductive layers. This structure is especially suitable for electrical components with limited space and high insulation requirements.

 

For high-voltage devices that require higher dimensional accuracy, Precision Metallized Alumina Ceramic Components can combine precision molding, sintering, metallization, and machining processes to meet complex structures and high-precision assembly requirements. New energy automobile parts continue to develop towards miniaturization, lightweight, and high power density, which also makes the dimensional control and processing consistency of ceramic parts more important.

 

On the other hand, as the operating voltage and switching frequency of power semiconductors increase, ceramic insulating materials also need to face higher electric field intensity and faster voltage change rates. Structures such as Metallized Ceramic Insulating Tubes and Metallized Ceramic Parts can be used for special electrical components that require both insulation, conductive connection, and encapsulation functions, providing more compact structural solutions for high-voltage electrical systems.

 

Metallization Ceramic Application Detail Diagram

 

 

Material properties and manufacturing processes need to be coordinated and optimized

 

The application of advanced ceramics in new energy vehicles is not a simple material replacement, but a systematic project involving materials, structures, processes and reliability verification.

 

First, appropriate ceramic materials need to be selected based on operating voltage, temperature, current, mechanical load and environmental conditions. Secondly, the molding, sintering, precision machining and surface metallization processes need to be determined according to the component structure. For high-pressure sealing devices, the thermal expansion matching between ceramic and metal materials and sealing residual stress must be further considered.

 

For power electronics, ceramic substrates also require focus on thermal cycle life and interface reliability. As new energy vehicles gradually develop from traditional IGBTs to high-performance wide-bandgap power semiconductors, the switching speed and power density of power modules continue to increase, and the requirements for insulating materials and packaging structures will also further increase.

 

High Purity Alumina Precision Advanced Ceramic Metallization Parts are suitable for special electronic components that require high purity, insulation performance, dimensional accuracy, and metallization reliability. Such products usually require full process control from ceramic powder, molding, sintering, to precision machining and metallization.

 

Development Trend of New Energy Automotive Ceramic Applications

 

From the perspective of the overall technological development direction of new energy vehicles, the application of advanced ceramics mainly presents three trends.

 

First, high voltage increases the demand for insulating ceramics. With the gradual application of 800V and higher voltage platforms, the requirements for insulation materials in high-voltage contactors, relays, power modules, and charging systems continue to increase. Ceramic materials have high dielectric strength and heat resistance, so they have a good application foundation in high-voltage electrical components.

 

Second, high power density drives the upgrade of ceramic packaging materials. New energy vehicle electric drive systems need to achieve higher power output in a smaller space, and the heat flow density of power semiconductors continues to increase. Therefore, ceramic substrates and packaging materials with good thermal conductivity and mechanical reliability will receive more attention.

 

Third, precision manufacturing promotes the development of ceramic parts into complex structures. New energy automobile parts have increasingly higher requirements for weight, space, and reliability. Ceramic components will not only undertake traditional insulation functions, but may also further integrate functions such as support, heat dissipation, packaging and electrical connection.

 

Overall, advanced ceramics have become an important material system in the high-voltage electrical and power electronics fields of new energy vehicles. From the insulating casing of high-voltage relays, to the ceramic copper-clad substrates in power semiconductor modules, to high-voltage contactors, insulating bearings and metallized ceramic connecting parts, ceramics are assuming more and more key functions in the electrification architecture of new energy vehicles.

 

In the future, as new energy vehicles develop towards higher voltage, higher power density, higher reliability, and smaller size, the value of Precision Metallized Alumina Ceramic Components materials will further transform from simple insulation materials to high-performance structural and functional materials. The continuous advancement of technologies such as material formulation, precision molding, metallization, ceramic-to-metal sealing, and reliability testing will become an important foundation for advanced ceramics to further enter the supply chain of core parts of new energy vehicles.

 

contact us


Mr Terry from Xiamen Apollo

Send Inquiry