Silver Contact And Stamping: Industry Knowledge and Product Highlights

Oct 27, 2025

Leave a message

Products introduction

Silver Contact And Stamping, also known as contact tips, buttons, or terminals, are electrical circuit components found in electrical switches, relays, and circuit breakers. They consist of two pieces of conductive metal that conduct or insulate current when the gap between them is closed or open. The gap must be an insulating medium such as air, vacuum, oil, SF6, or other electrically insulating fluids. Primary materials for silver contacts include silver/fine-grain silver, silver-nickel, silver-tungsten, silver-graphite, silver-cadmium oxide, silver-tin oxide, and silver-zinc oxide.

Manufacturing Process

Silver Contact Manufacturing Process

Rivet-type electrical contacts: The process remains essentially unchanged: silver alloy wire is combined with brushed and cleaned copper wire, cold-forged, and then subjected to post-processing (degreasing, grinding, pickling, annealing, polishing, protective coating, etc.) and inspection before the finished Electrical Spring Contact is achieved.

 

Sheet electrical contacts: The existing production process for flat sheet Rivet Components using strip rolling and stamping remains largely unchanged, with additional post-processing (grinding, polishing, and protective coating) added at the end. The raw silver alloy strip, purchased externally, is now in-house produced. Powder metallurgy has been added, with the main processes including silver powder preparation, powder mixing and sintering, and post-processing (polishing and protective coating).

 

Stamped Component Manufacturing Process
Mold Design: Design a suitable mold based on Stamped Metal Rivet Contact Components requirements to ensure the stamped product meets size and shape requirements.


Raw Material Preparation: Select suitable metal materials, such as copper alloys and stainless steel, that possess excellent electrical conductivity and mechanical properties.


Stamping: The raw material is placed in the mold, and pressure is applied by the stamping press to form the material within the mold.


Post-Processing: Electrical Contact Rivet Assemblies may require post-processing, such as deburring, cleaning, and electroplating, to improve product quality and performance.

Manufacturing Processes of Silver Contact and Stamping/Riveting/Welding Assemblies

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Industry Development Trends

With the continuous advancement of technology, the manufacturing processes for silver contacts and stamped components are also constantly innovating. For example, the use of automated production lines can improve production efficiency and Electrical Spring Contact quality.

 

Against the backdrop of increasingly stringent environmental policies, the production of Rivet Components must also comply with relevant environmental standards.

 

With the development of emerging industries such as new energy vehicles and 5G communications, the demand for Stamped Metal Rivet Contact Components is also increasing.

our Products

Our Silver Contact and Stamping products and stamping assemblies not only excel in traditional applications such as home appliances and relays, but also demonstrate significant potential in emerging fields such as new energy vehicles and 5G communications. We are committed to providing customers with high-quality products and services through technological innovation and superior manufacturing processes.

Silver Contact and Stamping

 

 

 

 

 

 

 

 

 

 

 

contact us


Mr.Terry from Xiamen Apollo

Send Inquiry