Brief Explanation of the Function of Various Types of High Voltage Switchgear

Mar 04, 2026

Leave a message

In high-voltage power distribution systems, various switchgear and supporting equipment constitute a complete system for receiving, distributing, metering, and protecting electrical energy. They are typically installed within complete electrical cabinets and enclosures to ensure operational safety and environmental isolation.

 

Electrical Cabinet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Power Incoming Cabinet (Main Incoming Cabinet) The power incoming cabinet is the energy entry point for the entire system, used to receive power from the upstream power grid or transformer output. It typically houses a main circuit breaker, disconnecting switch, and protection devices for overall system control and protection. When installed outdoors, it usually employs an outdoor electrical cabinet structure with a protection rating to meet dustproof, waterproof, and mechanical strength requirements.

 

2. Outgoing Cabinet The outgoing cabinet distributes electrical energy to downstream loads and is the main output unit of the power distribution system. It contains outgoing circuit breakers, protective relays, and cable connection terminals for controlling and protecting the loads of each branch. Its structure is typically a standard switching cabinet type, emphasizing breaking capacity and operational reliability.

 

3. Metering Cabinet: Metering cabinets are used for precise measurement and recording of electrical energy. They house voltage transformers (PTs), current transformers (CTs), and electricity meters. In large-capacity systems, dedicated structures, such as 400 amp CT cabinets or 600 amp CT cabinets, are often used to meet the metering requirements of different current levels.

 

4. Bus Tie Cabinet: When a system has dual power supply lines, a bus tie cabinet is required to enable switching and backup functions between the two bus sections. The bus tie cabinet connects the two main bus sections, remaining disconnected during normal operation and enabling power switching during faults or maintenance. Its structure is generally located within the main bus section and integrated into the overall electrical enclosure cabinet system.

 

5. PT Cabinet: PT cabinets primarily house voltage transformers and related measuring devices, providing standardized voltage signals for relay protection and metering systems. These cabinets are common in high-voltage systems, and their structure often adopts a metal-enclosed metal electrical cabinet design, emphasizing insulation and safe clearance.

 

6. Capacitor Cabinet
Capacitor cabinets are used for reactive power compensation, improving the system power factor and reducing line losses. They are generally installed in parallel on the main busbar side. They are widely used in low-voltage systems, but less so in high-voltage systems. Centralized compensation devices are usually housed in dedicated electrical cupboards or independent compensation units.

 

7. Interconnection Cabinet
Interconnection cabinets are used for interconnection and backup power supply between low-voltage systems connected to multiple transformers. When one transformer fails, load transfer is achieved by operating the interconnection cabinet. Under normal operating conditions, the interconnection switch is open, ensuring independent operation of each system. These cabinets often adopt a reinforced external electrical cabinet structure to ensure operational safety.

 

8. Ring Main Unit (RNU)
Originally, a RNU referred to a load switch cabinet used in a ring network power supply structure to improve power supply reliability and continuity. In modern applications, the name often refers to a load switch unit in general. Outdoor applications typically use an outdoor weatherproof enclosure cabinet box structure to adapt to complex environments.

 

9. Battery Cabinet
Battery cabinets are used to store DC operating power, ensuring reliable operation of the switch opening and closing and protection systems. Its core functions include: firstly, providing backup operating power; and secondly, providing high current support at the moment of closing. Battery cabinets are typically integrated with the DC system and installed in a dedicated electronic cabinet.

 

10. DC Power Supply Panel (Charging Panel) A DC power supply panel converts AC power into stable DC power and mainly consists of charging modules, monitoring modules, and battery packs. Its structure is often integrated into a high-strength GRP electrical cabinet or a similarly protected cabinet to ensure long-term stable operation.

 

11. Variable Frequency Drive (VFD) Cabinet A VFD cabinet controls motor speed through a frequency converter, achieving energy-saving operation and precise control. It is widely used in power systems such as water pumps and fans. This type of equipment is usually installed in a separate outdoor electrical cabinet or an indoor power control cabinet.

 

12. High-Voltage Switchgear High-voltage switchgear is used for receiving, controlling, and protecting electrical energy and is the core equipment of a high-voltage power distribution system. Its structure emphasizes electrical isolation, arc-extinguishing capability, and mechanical strength. It typically adopts a metal-enclosed structure and can be equipped with an electrical cabinet fan for heat dissipation management.

 

13. Centralized Switchgear (CSG) A centralized switchgear, also known as an armored withdrawable metal-enclosed switchgear, employs a three-layer structure: an upper busbar compartment, a middle circuit breaker compartment, and a lower cable compartment. The circuit breaker is located in the middle layer and can be withdrawn for maintenance, improving operational safety. Its structure typically utilizes high-strength GRP electrical enclosures or a steel cabinet design.

 

14. Power Cabinet A power cabinet primarily provides power control and protection for pumps, generators, and other rotating machinery. Depending on the load type, appropriate protection units and fuse assemblies can be configured, such as a dedicated fuse cabinet structure. The cabinet typically features a robust exterior electrical cabinet design to ensure safe on-site operation.
 

Collections of Electrical Cabinet Types

 

 

Regarding Distribution Cabinet Structure and Accessories

 

In both high-voltage and low-voltage power distribution systems, the safety of the cabinet structure is equally critical. Common accessories include dedicated electrical cabinet keys or key-for-electric-boxes for hierarchical management and safe operation. Appropriate cabinet selection (such as GRP electrical cabinets or metal-enclosed structures) directly affects the equipment's protection level and service life.
 

Conclusion and Product Connection

 

The reliable operation of high-voltage power distribution systems depends not only on the switchgear itself, but also on a safe, stable, and standard-compliant cabinet structure. Our company specializes in the research, development, and manufacturing of various industrial-grade power distribution cabinets and protective structures, covering a wide range of specifications and environmentally applicable solutions. We can provide customized cabinet structure support according to different project needs, helping power systems achieve safer and more efficient long-term operation.

 

contact us


Ms Tina from Xiamen Apollo

Send Inquiry