Analysis of the Function and Characteristics of Soft Magnetic Iron Relay Core
May 20, 2026
Leave a message
The Soft Magnetic Iron Relay Core is the "magnetic circuit skeleton" of an electromagnetic relay, responsible for efficiently concentrating the magnetic field generated when the coil is energized and guiding it to the armature. For example, when the coil is supplied with a common rated current of 12V/20mA or 24V/50mA, its permeability in silicon steel sheet material can reach 7000-10000. This permeability directly determines the magnetic field strength, thus driving the armature to move. If its magnetic reluctance is too high, such as when the air gap is not closed, the attraction force may decrease by more than 30%.

The Electromagnet Core needs to withstand repeated attraction impacts, and its service life can typically reach more than 100,000 cycles; it must possess high mechanical strength. Industrial-grade products often use a laminated structure with a thickness of 0.1-0.5mm. This structure can effectively reduce eddy current losses, thereby reducing temperature rise by 15%-20%.
The choice of materials for the DT4C Iron Core directly determines its application scenarios and performance, with significant differences in characteristics between different materials. Silicon steel sheets are low-cost, with a saturation magnetic flux density of approximately 1.8 Tesla, suitable for 50/60 Hz power frequency applications; permalloy has a coercivity as low as 1 A/m, making it ideal for high-frequency relays in communication equipment, but its cost is 3-5 times higher than silicon steel sheets; ferrite has lower high-frequency losses, but its saturation magnetic flux density is only 0.4 T, making it more suitable for miniature relays.
The temperature rise of the Pure Iron Relay Core directly affects the relay's lifespan. Experimental data show that when its operating temperature exceeds 80℃, the coil insulation aging rate increases by 2 times. Therefore, products used in high-frequency applications require forced air cooling or the selection of low-loss materials to control temperature rise and energy loss.
In industrial automation scenarios, the Core for Electromagnetic Relay needs to withstand vibration and dust, typically undergoing a 5-10μm thick nickel plating for corrosion protection. The magnetic circuit design also requires 10%-15% redundant magnetic flux to ensure operational stability.
In the new energy sector, such as photovoltaic inverter relays, the environmental adaptability requirements for the Cold Forging Relay Cores are even higher. They need to maintain stable magnetic performance within a temperature range of -40℃ to 125℃. These applications typically utilize nanocrystalline alloys with coercivity less than 5 A/m.

Through proper material selection and magnetic circuit design, Soft Magnetic Iron Cores for Relay can significantly improve relay response speed, for example, reducing it from 10ms to 3ms, while also reducing energy consumption by 25%. In the future, with the development of third-generation semiconductor technology, its high-frequency and miniaturization will become key research areas in the industry.
contact us
Our self-developed Soft Magnetic Iron Relay Core precisely matches the above optimization directions, covering a variety of materials such as silicon steel sheets, permalloy, and nanocrystalline alloys. It is suitable for various scenarios, including power frequency, high frequency, and new energy, balancing stability and energy efficiency to meet diverse engineering selection needs.
If you have any selection or customization requirements for Core Pins, please feel free to contact us. We will provide professional solutions and sincerely invite you to place an order and cooperate to build an efficient and stable relay application system.
Send Inquiry










