Analysis of Copper Busbar Dipping Technology and its Suitability for Various Applications
Jan 21, 2026
Leave a message
In the field of electrical connection and insulation protection, copper busbar dip-coating has become one of the mainstream copper busbar insulation treatment methods due to its reliable insulation performance and economic efficiency. This process is widely used in energy storage systems, but its application in power battery packs is relatively rare. This difference is closely related to technical characteristics and application requirements. The following analysis will examine its core technology, process, materials, and characteristics to clarify its application logic.

Copper busbar dip-coating is essentially a technology that uses a specific process to uniformly cover the surface of the copper busbar with a liquid gel-like insulating material, forming a dense insulating protective layer. The corresponding PVC Dipping Insulated Battery Busbar Connector is a typical component made based on this process. As a mature insulation treatment method, it can provide stable protection for copper busbars and adapt to the basic requirements of various electrical scenarios.
The copper busbar dip-coating process has strong standardisation, and the parameter control at each stage directly affects the final product quality. The first step is preheating, where the copper busbar is placed in a specialised furnace and heated to a suitable activation temperature. The core purpose of this step is to improve the adhesion of the subsequent adhesive, ensuring a uniform coating and reducing air bubbles. The temperature must be precisely controlled according to the size and material of the copper busbar and the type of adhesive. After preheating, the copper busbar is quickly immersed in the adhesive-like insulating material. The immersion time is set according to the required insulation layer thickness, and the lifting speed of the copper busbar must be strictly controlled. Too fast a speed can lead to coating ripples and uneven thickness, while too slow a speed may cause localised excessive thickness and sagging. The adhesive must also maintain a stable viscosity to ensure uniformity. Next is the plasticising stage, where the plasticised copper busbar is again placed in the furnace for heating, allowing the adhesive to undergo melting, cross-linking, and curing. Precise temperature control is crucial to avoid localised overheating or incomplete curing. After plasticising, cooling is performed, usually by water immersion. Finally, the copper busbar is removed from the mould through a demolding process, and the pre-cut ends are trimmed to complete the overall fabrication.

Currently, the insulating material used in dip-coating processes is primarily polyvinyl chloride (PVC) gel-like material. This material is composed of PVC resin, plasticisers, stabilisers, fillers, and other components, and is a gel-like fluid at room temperature. It boasts advantages such as low cost and excellent flowability, making it suitable for mass production. Its operating temperature range is -40℃ to 125℃, and its insulation strength can reach 20-28kV/mm, sufficient to meet the basic requirements of electrical applications such as power batteries and energy storage systems. It is also the core material choice for dipped copper busbar insulated with PVC dip.
Based on its material properties and process advantages, the dipped insulated copper busbar possesses three core characteristics. Firstly, it boasts stable insulation performance, withstanding voltages of 3500V AC/DC and above, effectively blocking current leakage and ensuring the safe operation of electrical systems. Secondly, it exhibits excellent coating uniformity; thanks to the superior flowability of PVC adhesive, it can form a fully covered, uniformly thick insulation layer even for complex-shaped copper busbars. Thirdly, it has strong adhesion; after plasticising and curing, the adhesive bonds tightly to the copper busbar surface, with a peel strength of≥4N/cm, making it less prone to peeling and cracking, suitable for long-term use.
Regarding temperature resistance and protection, PVC-coated copper busbars maintain a temperature resistance range of -40℃ to 125℃, with the insulation layer thickness typically controlled at 1-2mm on one side. It also possesses a certain degree of corrosion resistance, performing well in a 192-hour salt spray test at 35℃ in a 5% NaCl solution, resisting corrosion from common and complex environments such as humidity and dust, providing comprehensive protection for electrical connections.
Why do PVC-insulated busbars exhibit different applications in energy storage and power battery scenarios? The core difference stems from the different needs of the two scenarios. Power battery packs have extremely high requirements for space utilisation and lightweight design. The coating applied by the dip-coating process increases the thickness and weight of the copper busbars, making them difficult to fit within the limited space of the BDU and module, and also affecting the energy density of the power battery system. Simultaneously, power batteries generate a large amount of heat during charging and discharging. The insulating layer formed by dip-coating (especially the 1-2mm coating) hinders heat dissipation, easily leading to excessive localised temperature rise in the battery pack, affecting battery performance and operational safety. This is a key reason for its limited application in the power battery field.
On the other hand, energy storage systems are mostly fixed installations with relatively less constraint on space and weight, focusing more on the stability and safety of system operation. The excellent insulation performance and corrosion resistance of dip-coated copper busbars can precisely adapt to the complex environments of energy storage scenarios, such as humidity and dust, effectively reducing the risk of leakage and ensuring the safe operation of large-capacity energy storage systems. Furthermore, the cost advantage of PVC materials and the batch adaptability of the process also meet the needs of large-scale applications of energy storage systems, enabling the widespread adoption of this process in the energy storage field.
Overall, copper busbar dip coating technology has significant advantages in insulation performance, cost control, and adaptability to mass production. Its application scope is primarily determined by core requirements such as space, weight, and heat dissipation. In the future, with upgrades in insulation materials and processes, it may overcome current limitations and achieve wider application in the power battery field, providing more diverse insulation protection solutions for new energy electrical systems.
contact us
Send Inquiry










