Circuit Breaker Screw Clamp Terminal
Products Description

The Circuit Breaker Screw Clamp Terminal is an integrated wiring fastening assembly typically composed of the following components:
Precision Screw
Clamp Cage
Pressure Plate
Conductive Fastening Part
The product is pre-assembled into a single, integrated assembly that can be directly applied to circuit breakers, switches, fuses, and terminal connection systems to secure external conductors and achieve a stable conductive connection.
Its core functions include:
Wire clamping and securing
Stable conductive connection
Preventing loosening and detachment
Improving assembly efficiency
Technical Features & Design Advantages
| Anti-Deformation Frame Geometric Design | The Circuit Breaker Terminals are manufactured using a one-piece stretching or precision servo stamping process, with reinforcing ribs added to their side walls. When the screw is subjected to maximum torque, the frame is evenly stressed, preventing outward expansion of the outer wall and thus locking the wires in place for a long-term, constant clamping force. |
| Anti-Backout & High-Torque Thread Technology | The screw tail undergoes a special anti-backout stamping treatment. Even when fully loosened, the screw remains securely within the junction box, preventing it from falling out and greatly facilitating rapid wiring in overseas engineering projects. Simultaneously, precisely controlled thread tolerances ensure extremely high clamping torque. |
| Versatile Wire-Clamping Interface | The bottom inner wall of the Zinc Alloy Screw Wire Terminal features micro-groove (V-Groove/Serrated Surface) anti-slip grooves. When the wire is clamped, the grooves effectively pierce the trace oxide layer on the wire surface, increasing the contact area and friction, preventing the wire from coming off under external force. |

Advanced Manufacturing Processes: Guaranteeing Precision and Consistency
Stamping Process
Using progressive dies with an automatic feeding system, we efficiently control burrs and dimensional deviations in the forming of the Steel Cage Screw Terminal Block. After forming, deburring, and surface pretreatment processes are added to improve the adhesion of subsequent electroplating.
01
Tapping and Threading Process
The Circuit Breaker Screw Clamp Terminal threads are machined using high-precision tapping equipment to ensure thread dimensional accuracy and coaxiality, guaranteeing smooth screw insertion without jamming.
02
Heat Treatment Process
Heat treatment is performed within the range of 780–820°C, achieving a metal substrate hardness of 350–500 MPa (Britll), enhancing the terminal block's resistance to deformation under high clamping forces.
03
Electroplating process
Tin plating, nickel plating, or silver plating is selected according to customer requirements, with controllable thickness to ensure optimal balance between conductivity and corrosion resistance.
04
Automated assembly process
Pre-assembly of screws and wiring frames is completed by automated equipment, achieving torque consistency control and full dimensional inspection to ensure that each Fuse Holder Screw Clamp Terminal meets the factory's technical standards.
05

Detailed Specifications
Thread Engagement Area: Under a microscope, the thread flanks exhibit a uniform glossy band, free of stamping burrs or electroplating nodules, ensuring the linearity and repeatability of the torque-clamping force curve.
Wire Introduction Angle: The frame inlet is polished, with a roughness Ra ≤ 0.8 μm, preventing strands from being scattered during multi-strand wire insertion and maintaining conductor integrity.
Plating Continuity: X-ray fluorescence thickness gauge scanning ensures uniform plating across the screw head, shank, and frame cavity, with no unplated areas.
Torque Attenuation Test: After simulating 25 years of accelerated thermal cycling (-40 °C ↔ +105 °C, 500 cycles), the clamping force attenuation rate is less than 8%, and the contact resistance increase is less than 15%.
Packaging Protection: Each Galvanized Steel Screw Terminal Clamp assembly is positioned in an anti-static blister pack with a contoured groove on the bottom to prevent terminals from colliding during transport, maintaining the threaded pair in its factory pre-tightened state.

contact us
We not only provide standardized Pre-Fitted Screw Terminal Clamp products, but also offer integrated engineering support based on customers' circuit breaker structure, assembly process, and automated production line requirements. This support ranges from structural development and mold manufacturing to mass pre-assembly production, helping projects achieve more stable and efficient mass production.

Hot Tags: circuit breaker screw clamp terminal, China circuit breaker screw clamp terminal manufacturers, suppliers, factory, Clamp Screw For Contactor, Clamp Style Terminal Strips, M4 Screw Terminal, Screw Clamp Type Terminals, Screw Terminal Screws, Stamping Screw Terminal Block
You Might Also Like
Send Inquiry













