Brass Terminal Blocks
What are the Brass Terminal Blocks?

Brass Terminal Blocks provide conductive connection points for electrical assemblies requiring threaded fastening and integrated conductor access. The illustrated design features a rectangular brass body, multiple threaded holes arranged along the main surface and side face, and an axial through-hole at one end. This configuration allows different connection directions within a compact metal component.
Manufacturing requirements focus on brass material selection, thread accuracy, hole positioning, bore concentricity, and dimensional consistency. Depending on the electrical assembly design, the terminal block can be produced with specified external dimensions, thread sizes, hole depths, and internal bore geometry.
Custom brass terminal block manufacturing supports OEM/ODM projects, drawing-based machining, prototype development, and repeat production. Technical requirements can be established through 2D drawings, 3D CAD files, or approved physical samples. Wholesale production quantities, material specifications, inspection requirements, and delivery schedules are confirmed during quotation.
Brass Terminal Connectors Structure and Electrical Connection Design
Multiple Threaded Connection Positions
Multiple threaded holes provide fastening positions for screws, conductor terminals, or other compatible electrical components. Hole spacing, thread engagement depth, and screw dimensions must be matched to the assembly design to maintain stable mechanical contact.
Axial Through-Hole Configuration
The axial through-hole forms an opening through the end of the rectangular brass body. Its diameter, length, and position affect the installation of mating conductors or components. Bore dimensions should be controlled independently from the external body dimensions.
Rectangular Brass Body Geometry
The rectangular body provides defined mounting surfaces and a compact structural form. Its length, width, height, corner geometry, and hole positions determine installation compatibility with the electrical enclosure or supporting assembly.
Integrated Threaded and Bore Connections
Combining threaded holes with an axial bore allows multiple connection features to be incorporated into one component. This reduces the need for separate connection pieces where the circuit and mechanical design permit an integrated terminal structure.

Brass Connection Terminals Manufacturing Process
Brass Stock Preparation and Material Verification
Brass stock is selected according to the specified alloy grade, dimensions, and material condition. Incoming inspection should verify material identification and supporting documentation before machining. Material traceability helps maintain consistency between production batches.
Precision Drilling and Bore Machining
Drilling operations create the threaded-hole preparation and axial through-hole features. Tool selection, machining alignment, and chip removal influence hole diameter, surface condition, and positional accuracy. The axial bore requires particular attention to straightness and concentricity where specified.
Thread Cutting and Fastener Compatibility
Tapping operations form the internal threads required for screw-based electrical connections. Thread pitch, major diameter, minor diameter, and effective engagement length should follow the drawing. Thread gauges can be used to verify compatibility with the specified mating fasteners.
Surface Finishing and Burr Removal
Machined edges and openings require appropriate deburring to remove sharp edges and loose metal particles. Surface finishing should preserve the specified dimensions and avoid damaging the internal threads or electrical connection surfaces.

Frequently Asked Questions about Relay Brass Terminal Two-Way Connectors
What surface plating is recommended on brass terminal blocks to prevent galvanic corrosion with aluminum utility wires?
+
-
A 5 μm to 8 μm matte tin plating applied over a 1.5 μm copper flash barrier is standard for utility metering. Tin acts as an electrochemically compatible buffer between the copper-zinc substrate and aluminum or copper mains cables, preventing galvanic oxidation and maintaining low contact resistance.
Can you integrate a manganin current-sensing shunt directly into the Brass Through Hole Terminals and relay assembly?
+
-
Yes. Using electron-beam welding and precision resistance brazing, we join C11000 copper, manganin resistance alloy, and H57 brass terminal blocks into a single monolithic sub-assembly. This eliminates redundant mechanical interfaces, lowers total circuit impedance, and streamlines automated pick-and-place assembly for smart meter manufacturers.
Can these products be manufactured with multiple threaded holes?
+
-
Yes. Multiple threaded holes can be incorporated into the rectangular brass body according to the engineering drawing. Hole quantity, thread diameter, pitch, depth, and center-to-center spacing must be defined to ensure compatibility with the corresponding screws and electrical assembly.
What is the function of the axial through-hole in the product?
+
-
The axial through-hole provides an additional internal opening for a mating conductor or mechanical connection, depending on the assembly design. Its diameter, depth, and alignment must match the installation requirements. The actual electrical function should be confirmed through the product drawing.
How is thread accuracy inspected in machining?
+
-
Internal threads can be inspected using calibrated GO/NO-GO thread gauges corresponding to the specified thread standard. Inspection should cover thread pitch, diameter, effective engagement length, and surface condition. Sample inspection or batch inspection frequency should be established in the quality plan.

contact us
Submit your 2D/3D CAD drawings today for a 48-hour DFM weldability review and direct factory wholesale quote on customized Brass Terminal Blocks engineered to your exact smart meter and latching relay specifications.
Hot Tags: Custom Brass Terminals, Machined Brass Terminal Blocks, Brass Electrical Connectors, Threaded Brass Terminal Blocks, Brass Through Hole Terminals, OEM Brass Terminal Blocks, Beryllium Copper Moving Spring, Copper Manganese, E beam Welding Shunt, Electronic Contacts For Smart Meter Relay, Latching Relay Contact, Relay Copper Terminal
You Might Also Like
Send Inquiry














