Rear Sleeve Bearing

Rear Sleeve Bearing

In mechanical systems operating continuously, with frequent start-stop cycles, or in confined spaces, friction control between shafts and bearings directly determines the stability and service life of the entire machine. Rear Sleeve Bearing, as an important component of the sliding bearing system, achieves stable support, reduced friction, and wear control during axial and radial movements through reasonable material proportions and precise structural design, without the need for rolling elements. It is widely used in the rear support parts of motors, fans, pumps, transmission components, and various industrial equipment.
Send Inquiry

Products Description

 

Rear Sleeve Bearing

Rear sleeve bearings are a type of plain bearing/sleeve bearing. Their core operating principle is not based on rolling elements, but rather on the lubrication interface formed between the inner surfaces of the shaft and the sleeve to achieve smooth operation.

Structural Features Overview

Integral or split sleeve structure

The inner bore mates with the shaft, and the outer diameter mates with the housing.

During operation, an oil film or self-lubricating material serves as the friction interface.

Typically located at the rear end of equipment, used to stabilize the shaft system and suppress vibration.

These bearings have a simple structure, uniform stress distribution, and strong impact resistance, making them particularly suitable for low- to medium-speed, high-load, or high-start-stop conditions.

Product Nature and Core Features
 
 
 

Integrated Structural Design

Utilizing an integral sleeve structure with no disassembled parts, Bushing significantly reduces assembly complexity while enhancing structural rigidity, enabling it to withstand harsh operating conditions of high vibration and high load.

 
 

Precision Fit

Customized dimensional design is available for different shaft diameters and operating conditions, with internal wall fit precision down to the micron level, effectively controlling radial runout and ensuring equipment stability.

 
 

Wide Operating Condition Adaptability

Possessing excellent high-temperature resistance, wear resistance, and corrosion resistance, Shaft Sleeve can operate stably in temperature ranges from -40℃ to 200℃ and in harsh environments with high dust and humidity.

 
 

Low Maintenance

Optimized structure and material selection reduce lubrication requirements during operation, lowering maintenance frequency and costs, and extending the equipment's mean time between failures (MTBF).

 

Cylindrical Bushing

Technical Features: A Embodiment of Precision Engineering

 

Fluid Dynamics Lubrication Optimization Design

Oil groove and orifice layouts designed for specific speeds ensure rapid distribution of lubricating oil across the entire friction surface. We utilize Computational Fluid Dynamics (CFD) simulations to optimize the oil wedge angle, maintaining minimal oil film thickness even under boundary lubrication conditions.

01

Surface Topography Control Technology

The roughness (Ra value) of the bushing's inner surface is strictly controlled. It's not about achieving the smoothest surface, but rather preserving specific micro-textures to facilitate oil retention and break-in. This unique surface texture significantly shortens the "run-in period" between the Pump Shaft Sleeve and the shaft.

02

Thermal Management System

Considering frictional heat generation, we incorporate high thermal conductivity components into the material formulation and design heat dissipation channels in the structure to ensure rapid heat dissipation, preventing shaft seizure caused by localized overheating.

03

Thermal Management System

Edge loading design: The two ends of the Bearing Sleeve are designed with fine chamfers or loading grooves to effectively avoid edge stress concentration caused by shaft deflection. This is a key technical detail to prevent early fatigue failure.

04

Production Process of Screw Terminal and Rear Sleeve Bearing

Materials Science: Performance Breakthroughs Beyond Conventions
 
 

Composite Matrix Material

A high-strength bronze alloy matrix is ​​uniformly embedded with self-lubricating solid microparticles and reinforcing fibers, forming a three-dimensional interlocking structure. This design gives the material the thermal conductivity of metals, the low-friction properties of polymers, and the wear resistance of ceramics for the Distance Sleeve.

 
 
 

Surface Engineering Treatment

Ion infiltration technology creates a functionally graded layer with controllable thickness on the surface, achieving a surface hardness of HV280-320 while maintaining excellent toughness in the matrix, solving the brittleness problem caused by traditional hardening treatments for the Shaft Sleeve.

 
 
 

Corrosion Protection System

Employing multi-layered protection technology, including a passivation layer, a diffusion barrier layer, and a functional surface coating, ensures long-term stable operation in humid, chemically corrosive, or extreme temperature environments for Cylindrical Bushing.

 

Strict Selection of Steel Wire for Rear Sleeve Bearing

 

contact us


Mr Terry from Xiamen Apollo

 

Hot Tags: rear sleeve bearing, China rear sleeve bearing manufacturers, suppliers, factory, Hexagon Head Fange Bolt Screw, Hot Dip Galvanized Hex Nut, Bearing Sleeve, Fange Equipped Hexagon Head Bolt, Expansion Bolt Hook, Expansion Hook

Send Inquiry