Clip-On Floating Nut
Products Description
Clip-On Floating Nuts are self-clamping floating fasteners that are directly installed onto sheet metal holes or edges via a flexible snap-fit structure, eliminating the need for welding, riveting, or additional tools. Their core features are:
The nut body has a controllable floating stroke, allowing for fine-tuning in the lateral or radial direction within a certain range.
An external flexible clamping structure enables rapid positioning and stable locking.
Suitable for enclosed structures where rear-side operation is impossible or welding is inconvenient.
This combination of "floating + snap-fit" effectively absorbs hole misalignment, sheet metal deformation, and accumulated structural tolerances during assembly, significantly improving assembly success rate and efficiency.
Technical Features: Performance Behind the Data
Thrust and Torque Resistance
Our snap-fit design generates hundreds of Newtons of push-out force on standard sheet metal, far exceeding the forces encountered during typical handling and installation. Simultaneously, the rotational damping of the Floating Nut Assembly body within the base is meticulously designed to ensure both stability during screw insertion (anti-rotation) and smooth floating.
Temperature Rise Adaptability
The material's physical properties remain stable within an operating temperature range of -40℃ to +120℃. Even under extreme temperature differences, the snap-fit's clamping force exhibits extremely low attenuation, ensuring a safe connection.
Conductivity and Grounding Continuity
After the Cage Nut Assembly is pressed into the hole in the metal sheet, the claws make tight contact with the edge of the sheet, forming an excellent electrical conductivity path. This is crucial for the grounding protection of electrical control cabinets, achieving continuous grounding conductivity without the need for an additional grounding wire.
Detailed Showcase: The Devil Lies in Micron-Level Control
| Chamfering and Deburring | The bottom surface of the Floating Cage Nut and the edges of the clip undergo meticulous deburring. This is not merely for aesthetics, but also to prevent scratches on the panels of expensive equipment (especially painted or aluminum plates) during installation, avoiding rust sources. |
| Guide Angle Design | At the clip entry point, we designed a scientifically sound guide chamfer. This allows installers to easily align the holes during blind operation or semi-automatic pressing, significantly reducing assembly resistance and improving production line speed. |
| Coating Uniformity | Through centrifugal barrel plating, we ensure complete coating coverage even inside complex-shaped clips and deep blind holes. This eliminates potential difference corrosion caused by coating blind spots, ensuring rust prevention throughout the Floating Cage Nut's entire lifecycle. |
Materials and Performance Advantages
We offer a variety of material and surface treatment combinations to suit different application environments:
Base Materials: Carbon steel, stainless steel, alloy steel, etc.
Elastic Structural Materials: Heat-treated spring steel or stainless steel elastic materials
Surface Treatments: Zinc plating, nickel plating, phosphating, or custom anti-corrosion coatings
Material selection focuses not only on strength indicators but also on elastic recovery, fatigue life, and long-term stability to ensure reliable clamping force after multiple assembly cycles for the Cage-Type Floating Nut.
contact us
Hot Tags: clip-on floating nut, China clip-on floating nut manufacturers, suppliers, factory, Hex Flange Weld Nut, Flat Knurled Nuts, Expansion Bolt Hook, Stainless Steel Hex Bolts and Nuts, Double Point Screw, Bearing Sleeve
You Might Also Like
Send Inquiry